Type SB2 O-ring Pusher Seals | John Crane Mechanical Seals
This website uses cookies to ensure users have the best online experience. By continuing to browse this website, you are giving your consent to the use of cookies. To learn more, read our privacy policy. X

Nous sommes en train de traduire notre site Web. Cette page est actuellement disponible en anglais uniquement. Merci pour votre patience.

< Retour aux O-ring Pusher Seals

Type SB2

Heavy-duty Dual-cartridge Seals

The Safeseal Type SB2 is a dual-cartridge seal. Its double-balanced design ensures the reliability and longevity of the seal in the most demanding conditions. The Type SB2 seal is ideal for use with environmentally hazardous and abrasive fluids, most often used in pumps in pulp mills, minerals processing and other slurry duties up to 40 percent solids by weight and a solids hardness of 8 Mohs. The Type SB2 seal is widely used with other process equipment including agitators.
Several variant of the design available for different services:

Type SB2A — designed for ANSI standard dimensions

Type SB2A-PR — designed for ANSI standard dimensions, including integrated pumping device

Type SB2B — designed for big bore dimensions

Type SB2B-PR — designed for big bore back plate dimensions

Type SB2S — designed for special dimensions, including metric sizes

Type SB2S-PR — designed for special dimensions, including integrated pumping device

Recherche de documents


  • California Residents: PROPOSITION 65 WARNING
  • Seal faces are installed using a patented heat shrink process ensuring correct, distortion-free face alignment at all recommended temperatures.
  • The springs are located in the stationary body of the seal in the seal water (barrier fluid). The seal water washes the springs, preventing process chemical corrosion and reduces the risk of the springs becoming clogged. Shaft misalignment does not vibrate or wear out the O-rings.
  • PTFE slot rings replace the traditional O-rings in places where they are exposed to the product, preventing sticking.
  • Protected faces, the seal face carriers are driven by machined fits, preventing metal stress from distorting the face.
  • Patented double-balanced design allows the use of both pressurized and unpressurized seal water (barrier/buffer fluid) and prevents face overload.
  • SB2 series seals will accept ± 0.080"/± 2.0mm axial movement (shaft end play) during normal operation due to their piston design. Impeller adjustments do not affect face stress or spring strength.


Limites de température

350 °F/180 °C

Limites de pression

Pression du processus : 290 psi(g)/20 bar(g)

Fluide de barrière : 215 psi(g)/15 bar(g)

Limites de vitesse

65 pi/s/20 m/s

Matériaux standard

Faces de la garniture : SiC/Carbone ou SiC/SiC

Joints toriques : PTFE, EPDM, Viton, FFKM

Métaux : AISI 329 et 316 standard, titane, Hastelloy, UHB, 904, SAF 2507 pour les applications en eau de mer

Ressorts : Acier Nimonic

Applications recommandées

  • Pompes de traitement
  • Autres équipements rotatifs

Contact Us