Type SE2 O-ring Pusher Seals | John Crane Mechanical Seals
This website uses cookies to ensure users have the best online experience. By continuing to browse this website, you are giving your consent to the use of cookies. To learn more, read our privacy policy. X
< Back to O-ring Pusher Seals

Type SE2

Dual Mechanical Seals for Sulzer Process Pumps

The Safeseal Type SE2 is a customer-fitted (OEM standard) dual, balanced cartridge seal designed for the severe applications found in the pulp and paper industry and slurry applications. This seal is typically used in pumps for abrasive and environmentally hazardous liquids in cooking, evaporation and causticizing facilities in pulp mills. It is designed as a dual-pressurized (double) seal, but incorporates a patented double-balance feature which also allows it to be used as an unpressurized (tandem) dual seal arrangement. The Type SE2-AP seal is especially designed for the Sulzer APP pump series.

Several variants of the design available for different services:

Type SE2C — dual, balanced cartridge seal for Sulzer Scanpump

Type SE2CF — dual, balanced cartridge seal with flush for Sulzer Scanpump

Type SE2-APR — with circulation device

Features

  • California Residents: PROPOSITION 65 WARNING
  • Seal faces are installed using a patented heat shrink process, ensuring correct, distortion-free face alignment at all recommended temperatures.
  • The springs are located in the stationary body of the seal in the seal water (barrier fluid). The seal water washes the springs, preventing corrosion by process chemicals and reducing the risk of the springs becoming clogged. Shaft misalignment does not vibrate or wear out the O-rings.
  • The piston design permits free axial movement. It allows ± 2mm axial movement. Impeller adjustments do not affect face stress or spring strength.
  • PTFE slot rings replace the traditional O-rings in places where they are exposed to the product, preventing sticking.
  • Protected faces, the seal face carriers are driven by machined fits, preventing metal stress from distorting the face.
  • Patented double-balanced design allows the use of both pressurized and un-pressurized seal water (barrier/buffer fluid) and prevents face overload.

Parameters

Temperature Limits

350°F/180°C
Pressure Limits

Process pressure: 290 psi(g)/20 bar(g)

Seal water pressure: 215 psi(g)/15 bar(g)
Speed Limits

65fps/30m/s
Standard Materials

Seal faces: SiC/SiC (product side), SiC/Carbon (atmosphere side)

O-rings: PTFE (product side), EPDM, Viton

Metals: AISI 329 (standard), titanium, UHB, super duplex

Springs: Nimonic steel

Recommended Applications

  • Process pumps
  • Other rotating equipment
Works With
Smartflow Smartflow
Smartflow IG Smartflow IG
Safeunit™ Safeunit™
Safeunit™ Ultima Safeunit™ Ultima
Safeclean Safeclean
GR1/1C GR1/1C

Contact Us