H-R
High-performance, Reduced-moment Design for Low Overhung Moment (API 671 and ISO 10441)

H-R series couplings are designed for medium- to high-speed turbomachinery applications where low overhung moment and light weight with a high degree of reliability are critical. The couplings are manufactured in high alloy steel, with high-strength stainless steel flexible elements, supported by aircraft standard fastenings. The couplings are generally balanced to API 671 or similar, with pilot location to retain a very high level of repeatability.

为你推荐
Features
- California Residents: PROPOSITION 65 WARNING
- H-R hub/flex units are designed to accommodate typical machine shaft sizes for turbo-compressor applications.
- The separate spacer can be varied to provide the appropriate distance between shaft ends and the required torsional stiffness to suit individual applications.
- Reduced moment arrangement.
- Flexible discs visible for easy inspection.
- Factory assembled hub/flex element units.
- High-reliability stainless steel flexible disc design.
- Shrouded bolts to reduce windage.
- Built-in overload collars for additional safety.
- Full compliance with ISO10441 (API 671) — no exceptions.
Parameters
- Maximum Shaft
- 12.4"/315mm
- Maximum Torque
- 580,000 Nm (5,130,000 lbf/in)
- Speed Limits
- 37,700 rpm
- Temperature Limits
- -65°F to 300°F/-55°C to 150°C
Recommended Applications
- 流程泵
- Electric motors
- Gearboxes
- 蒸汽轮机
- Gas turbines
- 离心压缩机
- 其他压缩机
- 其他转动设备
- Generators
联系我们
几百名工程专家分布在全球200个区域我们通过创新来成就您