C1064/1993
Abrasive, Chemical and Extrusion-resistant Packings
John Crane styles C1604 and 1993 are ideal for abrasive services where packing extrusion and sleeve or shaft wear are a concern. These products maintain structural and dimensional stability, offering enhanced performance due to the combination of high-quality fibers constituting body construction and the reinforcement of carefully selected aramid or polyimide fiber external corners. These styles also feature chemical resistance and reduced hardware damage as opposed to packings constructed of high-percentage aramid fibers.
×
为你推荐
Features
- California Residents: PROPOSITION 65 WARNING
- C1064 — A combination of graphite impregnated PTFE and aramid fibers offering the extrusion and abrasion resistance ideal for a wide range of abrasive and chemical services.
- C1065P — A combination of graphite impregnated PTFE and polyimide fibers resulting in a high chemically resistant packing with non-scoring abrasion resistant corners.
- Applications — Dynamic/abrasives, water, chemicals, acids, medium caustics, corrosives, gases, air, oils, steam, solvents, wastewater, slurries, paper stock, liquors, asphalt, fly ash and condensate.
- Standard sizes — Styles C1064 and C1065P are available in standard cross-section sizes from 1/4" to 1" in 1/16" increments.
Parameters
- Temperature Limits
- C1064/C1065P: -350°F to 550°F/-212°C to 288°C
- Pressure Limits
- C1064/C1065P pump: 500 psi(g)/34 bar(g)
- Speed Limits
- C1064: 2500fpm/12.5m/s
C1065P: 3000fpm/15m/s - pH Range
- C1064: 2 to 12
C1065P: 0 to 12
Recommended Applications
- 流程泵
- 反应釜与搅拌器
- 其他转动设备
- Valves