Midstream/Downstream — Processing, Piping and Refining
Due to the volatile and hazardous nature of midstream and downstream oil and gas materials, every pump, compressor, turbine and mixer depends on innovative engineered components to optimize safety and emission containment. John Crane engineers products specific to abrasive conditions, pressure changes, and multi-phase fluid properties to maximize uptime and minimize emissions. If service, repair or refurbishment are ever needed due to planned or unplanned maintenance, we also have over 200 global rapid-response locations ready to dispatch specialized assistance at any time.
Our portfolio of oil and gas application-specific components spans all industry sectors:
Type 8648VRS Non Pusher Elastomer Crude Oil Pipeline Seal: Designed specifically to meet the demanding requirements of pipeline pumping station duties.
Type 48 Cartridge Seals: Designed to attain Maximum Achievable Control Technology (MACT) compliance in light hydrocarbons and other VOCs
Type 8B1 Mechanical Seal: Rugged and available in a wide variety of elastomers for handling a wide range of industrial fluids
API 682 Cartridge Seals: Industry-leading API standard seal configurations that are fully qualified and compliant
Types RREP and 8B1RS High-duty Seals:Ideal for handling high-pressure and high-speed applications
Universal Cartridge 5600 Seals: Medium duty, designed to full ANSI and DIN standards
Types 604, 609 and 606 Metal Bellows Seals: Designed for high-temperature liquid sealing applications to 425°C/800°F
Type 670 Metal Bellows Seals: All-alloy, corrosion-resistant construction intended for crystallizing, caustic and acid services
Types 48SC, ECS® and SBOP Secondary Containment Seals: Meet strict emission requirements and eliminate need for liquid barrier systems
Type 2800, 2874 Cartridge Seals: Specifically designed to meet strict zero-leakage requirements
Type 28SC Non-contacting Gas Seal: Ideal for light flashing hydrocarbons in remote locations
AURA™ : Proven success in pipeline gas compression, offshore platforms and refineries
Calculate the economic benefits of retrofitting oil-seal equipped centrifugal compressors using the John Crane Lifecycle Cost Calculator.
Type 28ST Steam Turbine Seal: An alternative to carbon ring seals that virtually eliminates steam leakage
T-Series and M-Series: A standard for API 610 and API 671
TSKS/TSCS: Designed to give the most flexible solution for high-torque and misalignment conditions. Ideally suited to meet the pumping, motor, and turbine drive power transmission needs of the oil and gas industries.
John Crane A-Series couplings: Membrane, elastomeric and gear types ideal for less-critical applications
Seal Support Systems
PR 52/PR 53A: Reservoir-based seal support systems designed for both API Plan 52 and 53A applications to support unpressurized and pressurized dual seals
PA 53B: Accumulator-based system that uses a bladder to maintain pressure to pressurized dual seals and absorb barrier fluid thermal expansion
PA 53C: Accumulator-based system that uses a piston to maintain pressure to pressurized dual seals and absorb barrier fluid thermal expansion
RU-2/RU-4: Portable units that allow refilling of a seal reservoir or barrier fluid circuit while the system is pressurized and in operation
PL 54/PL 55: Provide a pressurized or unpressurized barrier/buffer fluid to dual seals; preferred where flow and heat removal capacity exceeds that of API Plan 52 or 53
WCH/WCV/K2S: Water-cooled heat exchangers for use where water is readily available
PD 75: Leakage detection and monitoring for dual-unpressurized seal arrangements where the outer seal is dry-running and the leakage can condense
PD 76: Provides detection and monitoring for non-condensing leakage in a dual-unpressurized seal arrangement where the outer seal is dry-running
PD 65A/PD 65B: Used to capture and monitor seal leakage in single-seal applications
PG 72: Provides a clean, regulated gas supply to dual-unpressurized seal arrangements where the containment seal is dry-running
PG 74: Provides a clean, regulated gas supply to API Plan 74 dual-pressurized, non-contacting seal arrangements
Liquid Filtration: Filters designed for almost any liquid application, from lubrication, hydraulic or bearing oil systems to water injection systems.
Seal-Gas-Filtration: Removes liquid and particle contamination to allow continuous supply of clean, dry gas
Fuel-Gas-Filtration: Individually tailored for maximum reliability, regardless of the condition of the supply gas
Fuel Oil Filtration: Patented elements that remove water and particle contamination for maximum reliability
Double 3-way and 6-way Transfer Valves: Provide continuous operation while one side receives maintenance
Filter Elements: Patented design for maximum performance and running time between change outs
Filtration Systems and Elements and Customized Filtration Solutions are is used in the chemical industry for processing reagents, such as separating impurities or undissolved substances from solutions, and for processing reaction mixtures.
Styles 1625G and 1635: High-temperature graphite braided packings that offer dimensional stability, reduced process contamination and ease of use
Style 1627G: High-temperature carbon braided packings that offer dimensional stability, reduced process contamination and ease of use
Styles G58, G57 and G581: High-purity, high-strength interlace braided flexible graphite packings designed to handle a wide range of fluids
Style 894: Cost-effective, general service graphited packing designed to handle a wide range of fluids at moderate to high temperatures, pressures and shaft speeds
100AL: Strong, compressible metallic packing that demonstrates remarkably good shaft conformability and low friction characteristics
Style K1730: Constructed of high-tensile strength, abrasion-resistant fibers for excellent chemical resistance, dimensional stability, resilience and conformability