This website uses cookies to ensure users have the best online experience. By continuing to browse this website, you are giving your consent to the use of cookies. To learn more, read our privacy policy. X
< Back to General Industrial Couplings

ZMHS

Stainless Steel Coupling with Composite Spacer for Cooling Tower Applications

Radial spoke form membrane coupling with composite spacer element for long DBSE applications. Computer-controlled, filament wound, matrix torque tube with stainless steel hubs, hardware and disc packs. Up to 80 percent lighter than comparable welded metal torque tubes and corrosion-resistant for corrosive atmospheres. The unique spoke form membrane provides a good level of misalignment capacity, but in the rare event of membrane failure, the drive is disconnected, permitting the driven half to safely come to rest, without further damage to the machine.


View complete list of product documents in all languages >
ZMH lg
  • ZMH lg
  • ZMH 2
  • ZMH 3
  • ZMH 4

Features

  • Computer-controlled, filament-wound, matrix torque tube with stainless steel hubs, hardware and disc packs.
  • Suitable for vertical line shafts without excessive loads on the membranes.
  • Inherent balance to AGMA Class 9.
  • Eliminates intermediate bearings for shaft separation (DBSE) to over 19ft/6m.
  • Ease of installation — no crane required.
  • Minimum downtime, optimum reliability.
  • Stainless steel construction of all components, other than the spacer.
  • Tube design virtually eliminates thermal expansion and sag.
  • Corrosion-resistant to cooling tower environment and temperatures up to 300°F/150°C.
  • Piloted fit of hub to disc pack to torque tube assures dynamic balance retention.
  • Unique disc pack spokes are designed to shear if torque overload or excessive misalignment conditions occur, protecting expensive motor and gear.
  • Increases machinery life.
  • Minimizes weight of drive shafting up to 80% lighter than equivalent steel torque tubes.

Parameters

Maximum Shaft

4.5"/114mm

Maximum Torque

3,000 Nm (26,500 lbf/in)

Speed Limits

3600 rpm

Temperature Limits

-60°F to 300°F/-50°C to 150°C

Recommended Applications

  • Electric Motors
  • Gearboxes
  • Cooling Towers
  • Other Rotating Equipment

I have a question about the [Product Name]:

{0} must be filled in.
{0} must be filled in.
{0} must be filled in.
{0} must be filled in.
{0} must be filled in.
 
Captcha